Varec 8300 series Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 150

Varec 8300 series Скачать руководство пользователя страница 81

8303

Varec, Inc.

71

5.9

Modbus Scanner (MSCAN)

The Modbus Scanner point provides communication between the 8303 TGI and

Modbus compatible slave devices represented by MG5000, MIREG, MFPREG, or any

other Modbus slave interface points. It includes parameters for configuring that

communication, and It provides dynamic and statistical information related to

connected devices. Two MSCAN points (one for each channel) are automatically

created when the motherboard detects the Model 8203.

5.9.1

Parameters

The database parameters used by the MSCAN point are listed and described below:

Configuration Parameters

Function

Chan

The physical channel (J2 or J4) used on the Model 8203. One MSCAN

point is created automatically for each channel by the system. The Chan

parameter is set in each MSCAN point and should not be changed.
For more information about the Model 8203 COM channels, see section

2.2.3 on page 10.

MaxRetry

Value between 1-10 indicating the number of times the scanner will

retry a request to a slave device. Default is 2.

Timeout

Time (in milliseconds) that a Device must respond to a request. Default

is 2000.

ScanDelay

Time in milliseconds for the delay between scans. The default is 500.

BaudRate

Baud Rate for communications to the slave device. Valid values are:

1200, 2400, 4800, 9600 and 19200.

LevelConvert

Determines the units in which the level data will be displayed.
F: Feet
M: Meters
Default is F.

TempConvert

Determines the units in which the temperature data will be displayed.
F: Fahrenheit
C: Celsius
If no value is specified, no conversion will be performed. The default is

F.

DensityConvert

Determines the units in which the density data will be displayed.
A: API
L: lbs/cu ft
K: kgs/m3.
If no value is specified, no conversion will be performed.
The default setting for this point is A.

Dynamic Parameters

Function

ScanCmd

Allows the user to Enable, Disable, or Reset Scanning.

ID

Address of slave device.

«
...
79
80
81
82
83
...
»

Содержание 8300 series























































































































































Отзывы:

Нет отзывов