Varec 8300 series Скачать руководство пользователя страница 117

Страница: 117 / 150

8303

Using ViewRTU

Varec, Inc.

107

8 Using ViewRTU

8.1

Overview

This chapter describes the software used to configure the Tank Gate Interface. This chapter

describes each of the menus found in the menu bar. Additionally, the chapter describes the

system requirements and the installation procedure. Use this chapter in accordance with the

Tank Gate Interface Software Blocks section.

ViewRTU software, a Microsoft Windows application, is designed to configure and view data

points in the Tank Gate Interface. ViewRTU is a utility program that can be used for

configuration, diagnostics, data acquisition and control. Since ViewRTU follows the Windows

standard, the user that is familiar with Windows will be able to learn the program quickly.

ViewRTU supports the Windows standard of selecting commands from a series of pull-down

menus. If the user is not familiar with Windows-based programs, then refer to the Microsoft

Windows manual for basic instruction.

8.2

System Requirements

The minimum requirements needed to run the ViewRTU application are listed below:

•

386/486/Pentium Personal Computer

•

Microsoft Windows NT, 2000, or XP

•

96 MB RAM

•

2 MB free disk space

•

1 Com Port

8.3

Installing ViewRTU

To install the ViewRTU application, follow the steps listed below.

Installing ViewRTU

•

Insert

the CD into the CDROM or DVDROM drive.

•

Select the drive that contains the disk from the Windows File Manager.

•

Double click on the SETUP.EXE file. The setup program prompts the user for the drive and

directory used to install the software.

•

Select the drive and type in the directory name. Once the drive and directory are selected,

the setup program copies all of the files to the chosen destination.

•

When all of the files have been copied to the destination, the setup program automatically

builds a program group with corresponding program items in the Windows Program

Manager.

8.4

Executing ViewRTU

This section describes how to start up the ViewRTU program. The components of

the window are also described in this section. To execute the ViewRTU program,

follow the steps below:

Содержание 8300 series























































































































































Результаты поиска

Содержание 8300 series

Отзывы:

Varec 8300 series, Инструкция по установке и эксплуатации, Страница: 117 / 150

Результаты поиска

Содержание 8300 series

Отзывы: