Vaper 19802, Инструкция по эксплуатации

Страница: 4 / 28

SPECIFIC SAFETY WARNINGS
V0.1
19802
SERVICE
FIRE SAFETY
To reduce the risk of fire or explosion:
•
Fumes from solvent and paint are flammable
and may ignite or explode.
Use only in a well-
ventilated area and allow fresh air to move through
the work area. Keep the pump well-ventilated and
do not spray the pump assembly.
•
Sprayer generates sparks. When flammable
liquid is used in or near the sprayer or for flushing
or cleaning, keep sprayer at least 20 feet (6 m)
away from explosive vapors.
•
Do not spray flammable or combustible
materials near an open flame or sources of
ignition such as water heaters, cigarettes,
motors, and electrical equipment with pilot
lights.
Use only water-based or mineral spirit-type
materials with a flash point greater than 70
°F
(21
°C).
•
Paint or solvent flowing through the equipment
can result in static electricity.
Static electricity
creates a risk of fire or explosion in the presence of
•
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
•
Check for damaged parts before each use. Check
to determine that guards operate properly and
perform their intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by
an authorized service center. Following this rule will
reduce the risk of shock, fire, or serious injury.
•
Inspect power tool cord periodically and, if
damaged,
it must be replaced only by the
manufacturer or by an authorized service center to
avoid risk. Following this rule will reduce the risk of
electric shock or fire.
•
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
This sprayer is not intended for use with flammable or combustible materials
used in industrial or fixed location applications such as factories or paint shops.
Follow all applicable federal, state, or provincial regulations and comply to NFPA
33 and OSHA requirements if used in these applications.
! WARNING
•
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
•
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
•
Store idle power tools out of the reach of
children and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the
hands of untrained users.
•
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
paint or solvent fumes. All parts of the spray
system, including the pump, hose assembly, spray
gun, and objects in and around the spray area shall
be properly grounded to protect against static
discharge and sparks. Use only conductive or
grounded high pressure airless paint sprayer hoses
specified by the manufacturer.
•
Prevent static discharge by ensuring that all
containers and collection systems are properly
grounded.
•
Always use a grounded outlet and grounded
extension cords.
Do not use a 3-to-2 plug
adapter.
•
Do not use a paint or solvent containing
halogenated hydrocarbons.
Know the contents of
paints and solvents being sprayed. Read all
Material Safety Data Sheets (MSDS) and container
labels provided with the paints and solvents. Follow
the paint and solvents manufacturer’s safety
instructions.
•
Always keep a working fire extinguisher nearby.
•
Do not smoke in the work area.
•
Do not operate light switches, engines, or
similar spark producing products in the spray
area.
•
Keep the work area clean and free of paint or
solvent containers, rags, and other flammable
materials.
! DANGER
4