12
Power On
6.
Plug the sprayer into a grounded outlet and turn
the power ON / OFF Switch (B) to the ON position.
5.
Set the Pressure Control Knob (D) to the
Prime/Clean position.
7.
The sprayer will start pumping water or flushing
solvent. Air and storage oil will be purged from the
system. Allow the fluids to continue being
discharged from the Primer Output Tube (H) for 30
to 60 seconds, then turn the power ON / OFF
Switch (B) to the OFF position.
Power Off
8.
Remove the Suction Tube (J) and Inlet Screen (K)
from the pail that contains water or flushing solvent
(step 3) and insert into the container that holds the
paint you will be using.
Power On
9.
Turn the ON / OFF Power Switch (B) ON.
10. Paint will begin to be pumped through the Suction
Tube (J) and will begin to be discharged through
the Primer Output Tube (H) and into the waste /
solvent pail.
11. Hold the spray gun pointing into and against the
waste / solvent pail.
12. Unlock the trigger lock.
13. Pull and hold the trigger.
14. Turn the Spray / Prime Switch (F) to the Spray
position.
Spray
15. Continue to hold the trigger while pointing the gun
into the waste / solvent pail until only paint is
coming out of the gun.
Unlocked
V0.1
19802
Содержание 19802
Страница 23: ...23 PARTS DIAGRAM 19802 V0 1...
Страница 25: ...25 NOTES 19802 V0 1...
Страница 26: ...26 NOTES V0 1 19802...
Страница 27: ...27 NOTES 19802 V0 1...