Vante
®
Model 4600
15
3.
Maintenance
Other than periodic cleaning, or when moisture, media, or other contaminants are visible,
the sealing head and Power Source are designed to be maintenance free and to withstand
substantial wear and tear. Damage may occur as a result of dropping either the Sealing
Head or the Power Source.
Because the Power Source is capable of detecting RF arcing which may be due to
moisture or other contaminants in the sealing region, the Power Source performance will
be reduced if the sealing region becomes contaminated or wet with fluids. To obtain
satisfactory seals at all times, ensure the sealing region and all adjacent areas are always
kept clean and dry.
Do NOT, under any circumstances, submerge the sealing head in any kind of liquid. This
will damage the RF jaw/tube assembly and void the warranty.
3.1
Cleaning Power Source Case
Ensure that the AC power switch located on the rear of the Power Source is in the
"
"
(off) position. Disconnect the AC power cord from the AC outlet. Disconnect the RF
power cable and AC power cord from the Power Source.
Apply a cleaning solution made from a mild detergent (or household cleaner such as
Formula 409)
and water to a clean soft towel. Wipe the Power Source case with the
damp
towel until clean. Ensure the Power Source is completely dry before placing back
into service.
Periodically vacuum the fan area to remove dust or other build-up.
WARNING
:
Do not apply fluids directly to the Power Source case and do not over-
saturate the cleaning solution applicator. The fluids may run into the
electronic components and cause contamination of the electronics and
subsequent unit malfunction.
Never immerse the Power Source in any
liquid.
Содержание 4600
