Vante
®
Model 4600
8
connector clockwise to lock it in place. Plug the seven-pin connector into the DC output.
See Figure 2.2.
Figure 2.2 Model 4605 Bench Top Sealing Head Cable Attachment
CAUTION:
Do NOT attempt to use any other length or type of RF power cable.
Unauthorized substitution of the RF power cable may result in
malfunction of the Power Source and will void the warranty!
Place the Bench Top Sealing Head in a convenient location, allowing clear access to the
head and routing the cable so that it does not interfere with other activities.
Turn on the unit by pushing the rocker-type power switch on the rear of the Power Source
to the
"
|
"
(on) position. The RF ready light
on the front of the Power Source
will
illuminate immediately, indicating that the Power Source is ready for use.
2.2
Sealing Procedure with Model 4105 Hand Held Sealing Head
For sealing and segmenting tubing, hold the sealing head in the palm of either hand with
the fingers on the moveable lever so that the splash guard and sealing indicator light face
the operator, as shown in Figure 2.3. In this position, the tubing can be easily placed into
the space ("sealing region") between the RF and ground jaws, sealed, and
pushed
through
the region to the next sealing position by the operator's free hand.
Figure 2.3 Correct Technique for Holding the Sealing Head
BNC Connector
Seven Pin Connector
Содержание 4600
