Vanguard Instruments Company IRM-5000P, Руководство пользователя

Страница: 46 / 58

IRM-5000P USER’S MANUAL REV 2
42
3.2.3. Printing a Test Record from the Working Memory
After performing a test, the results are stored in the IRM-5000P’s working memory. The
tabulated results, resistance plot, and current plot can then be printed. Also, if a record is
restored from the unit’s Flash EEPROM to the working memory, the test results can be printed
on the thermal printer. Use the steps below to print a test record from the working memory:
a. Either perform a test or restore a test record from the Flash EEPROM. Then start from
the “START-UP” menu:
Press the
[2]
key ( UTILITIES ).
b. The following screen will be displayed:
Press the
[1]
key ( PRINT ).
c. The following screen will be displayed:
1. PLOT R
Press the
[1]
key ( PLOT R ) to print the resistance versus time graph. The graph
will be printed on the thermal printer and you will be returned to the “START-
UP” menu.
2. PLOT I
Press the
[2]
key ( PLOT I ) to print the current versus time graph. The graph will
be printed on the thermal printer and you will be returned to the “START-UP”
menu.
3. PLOT R,I
Press the
[3]
key ( PLOT R,I ) to print both the resistance versus time graph and
the current versus time graph. The graphs will be printed on the thermal printer
and you will be returned to the “START-UP” menu.
1.PLOT R 2.PLOT I
3.PLOT R,I 4.SUMMARY
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
1. RUN TEST 05/05/10
2. UTILITIES 15:15:15
Bat:
TERMINAL VTG: 1 V