IRM-5000P USER’S MANUAL
REV 2
40
3.2
Working With Test Records
3.2.1. Saving a Test Record
After performing a test, the test results are temporarily stored in the IRM-5000P’s working
memory. At the end of the testing procedure, the user is presented with an option to save the
test results to the unit’s Flash EEPROM. If the results are not saved during the testing
procedure, they can still be saved as long as another test has not been performed. To save the
test results from the last test performed:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
UTILITIES
).
b.
The following screen will be displayed:
Press the
[2]
key (
SAVE/RES
).
c.
The following screen will be displayed:
Press the
[1]
key (
SAVE
).
d.
The test record will be saved in the IRM-5000P’s Flash EEPROM. The test record number
will be automatically assigned by the IRM-5000P. The following screen will be displayed
when the test record has been saved:
Press any key to return to the “START-UP” menu.
TEST NUMBER 11
HAS BEEN SAVED!
TERMINAL VTG: 1 V
1.SAVE 2.RESTORE
3.ERASE 4.DIRECTORY
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
1.
RUN TEST 05/05/10
2.
UTILITIES 10:15:15
Bat:
TERMINAL VTG: 1 V
Содержание IRM-5000P
