V&T E5 Series, Руководство пользователя

Страница: 42 / 157

E5 Series High Performance Universal Inverter User’s Manual
Chapter 3 Electrical Installation 29
3.T0 Control Circuit Peripheral Devices
Terminal number
Terminal
screw
Tightening
torque
(N·m)
Wire
specification
(mm
2
)
Wire type
+T0V, AIT, AIT, AI3, 485+, 485−,
AOT, AOT, GND
M3 0.5 ~ 0.6 0.75
Shielded twisted
pair cable
+T4V, PLC, XT, XT, X3, X4, X5,
X6, X7TDI, COM, YT, YTTDO,
COM, RA, RB, RC
M3 0.5 ~ 0.6 0.75 Shielded cable
3.TT Description of Jumper Function
Jumper selection in the following figure:
Name Function Default
AIT I: AIT analog input is current (0 ~ T0mA) V: AIT analog input is voltage (0 ~ T0V) 0 ~ T0V
AIT I: AIT analog input is current (0 ~ T0mA) V: AIT analog input is voltage (0 ~ T0V) 0 ~ T0mA
AOT I: AOT analog output is current (0 ~ T0mA) V: AOT analog output is voltage (0 ~ T0V) 0 ~ T0V
AOT I: AOT analog output is current (0 ~ T0mA) V: AOT analog output is voltage (0 ~ T0V) 0 ~ T0mA
485
485 terminal resistor selection:
ON: T00Ω terminal resistor is selected OFF: Terminal resistor is not selected Not
selected
S6
Control board grounded selection:
ON: Control board is grounded OFF: Control board is non-grounded
Grounded