VBBIM09/33/20 v5.0.3
Chapter 12 Schlage Adaptable AD-400 Series
153
WRI400
The WRI400 is a networked access point controller that communicates with
bright blue
via RF through a mating
Panel Interface Module (PIM400-485-VBB). It is designed to provide wireless connectivity to electronic access
control components including credential readers, door position and request to exit switches.
Performance
▪
Verification Time - Less than 0.10 second (not including panel delays)
▪
Communications (Heartbeat) Interval - Configurable in 1 second increments from 1 second to 18 hours.
Heart Beat can be set to 1 second for override operation
▪
Features - Tamper Switch, Door Status Monitoring, Door Strike Relay, Aux Relay, and 2 Reader Head
operation.
▪
Inputs - Request-to-Enter, Request-to-Exit, Door Position Switch, Reader Tamper 1, Reader Tamper 2
▪
Addressing
Card formats
▪
Accepts card formats up to 255 bits.
Operational environment
▪
Temperature - -31ºF (-35ºC) to 151ºF (66ºC)
▪
Humidity - 0 - 100% condensing
Power source
▪
Power Requirements - 12 VDC or 24 VDC; 500 mA maximum current
Radio Frequency (RF)
- The PIM includes an RF Transceiver.
▪
Optional Dynamic Channel Switching
▪
900 MHz spread spectrum, direct sequence, 10 channels
▪
Frequency - 902-928 MHz
▪
Data Rate - RF: 40 kbps
▪
Modulo 256 error detection
▪
Encryption: AES-128 bit keys
▪
Approvals - FCC and RSS-210 (Canada)
▪
Transmitter Power - Up to 300mW
▪
Receiver Sensitivity - 90dBM typical
▪
Remote antenna modules - The PIM modules are capable of accommodating Remote Antenna Modules.
