102 bright blue Installation Manual
Configuration GUI (Graphic User Interface)
Go to https://VBB-NRI_G2_IP_Address to access the Configuration Application
(PW = “SECAdmin1”).
Main Settings
Hostname
- This displays the name of the specific VBB-NRI G2 board. The default name should not be
changed. The name is in a standard format of VNRI-XXXXXXXX
▪
VNRI
– Vanderbilt Network Reader Interface
▪
XXXXXXXX
– Serial number of the specific VBB-NRI G2 (
29006528 in the example above
)
The Host Name is used to access and setup the VBB-NRI G2 using Dynamic DNS in conjunction with DHCP.
Consult with network technicians for details on setting up your network in this manner.
DHCP
- This setting sets up the VBB-NRI G2 to use a DHCP server on your network (use only if you have a
DHCP server on the network).
Static
- This setting forces the VBB-NRI G2 to use a static IP address.
IP Address
▪
When in Static mode, this is where you set the NRI's IP address.
▪
When in DHCP mode, displays the IP address configured by the DHCP server.
Subnet Mask
▪
When in Static mode, this is where you set the NRI's subnet mask.
▪
When in DHCP mode, displays the subnet mask configured by the DHCP server.
