Vanderbilt bright blue, Руководство пользователя

Страница: 145 / 242

144 bright blue Installation Manual
3 Select
Manager
from the
Log on as
drop down menu.
4 Enter the password into the
Password
field. Default password is
123456
5 Click the
Login
button. The SUS program will open. The bottom of the screen will say
No Device
Connected.
6 Connect the PDA to the AD-300 lock using the supplied USB cable.
7 Press the
Schlage
button twice on the AD-300 keypad. The bottom of the PDA screen will now display
AD300.
8 Click on the
Options
button at the bottom of the PDA screen. A list of options will open.
9 Put the AD-300 lock into
Pairing Mode
(this is necessary for the PDA to be able to make changes to the
lock's settings).
10 Hold down the
Internal Push Button
on the AD-300 lock.
11 While holding down the
Internal Push Button
, click the
Tamper Switch (SW1)
three times on the AD-
300 lock. The red LEDs in the Schlage button will flash.
12 On the PDA click the
Pair PDA to Device
option. A pop-up will display when the pairing process is
complete.
13 Click on the
Lock Properties
option.The Lock Properties window will open.
14 Click on the
Edit
tab.
15 Click on the
RS485 Address
field. A touch-keyboard will open at the bottom of the screen.
16 Using the touch-keyboard, enter in the address of the lock.
17 Click on the
Save
button at the bottom of the screen. After a moment the
Properties Saved
Successfully
pop-up will open.
18 Either click
OK
on the pop-up, or wait a moment and it will close on its own. The lock has been addressed.
19 Make a note of the address, it will be required to set up the lock in the software.