manualshive.com logo in svg

Van Der Stahl V-460 Series, Руководство по эксплуатации, Страница: 65 / 76

Поделиться
Скачать
Van Der Stahl V-460 Series Скачать руководство пользователя страница 65

V-460/610 Series Operating Instructions Ver.2.04E

65

The air filter is located between the vacuum nozzle and
vacuum pump, storing any foreign objects accidentally
taken in though the nozzle inside the filter cup.  Be sure
to check and clean the filter cup everyday before
starting the operation.
Clogging in the filter element can decrease vacuuming
ability and also cause discrepancy between the actual
vacuum level inside the bag and vacuum level indicated
by the vacuum gauge.
Although it depends on the packaging content and
frequency of use, clean the filter element by blowing
compressed air once a week to remove clogging.

■

Removing the filter cup and filter element

1

  Slide the rock button down and rotate the filter

cup to either right or left 45 degrees.  The filter 
cup is detached from the body. 

2

  Rotate the deflector to either right or left 45 

degrees and pull it out to remove from the filter 
cup.

3

  Hold the deflector with your hand and rotate the 

baffle clockwise to remove it from the deflector. 
Now the filter element is detached.

■

Attaching the filter cup and filter element

4

  Attach the filter element to the deflector, and set

the baffle in the position. Rotate the baffle 
counterclockwise to fix it.

5

  Insert the filter element assembly into the filter 

cup. Rotate the deflector to either right or left 
45 degrees to fix it.

6

  Attach the filter cup assembly to the body.

Slide the lock button down.  The filter cup 
assembly is rotated until the filter cup assembly 
is attached to the body, and the lock button 
clicks into body when locked in position. 
Confirm the lock button is locked to the flute of 
the body before it pressurizes it. 

11-2  Cleaning the air filter

Body

1

2

3

Lock button

Deflector

Deflector

Filter element

Baffle

Filter cup

Filter cup

Caution

 If any liquid is sucked through a vacuum 

nozzle, it goes inside the vacuum pump 
through the filter element (filter) and damage 
the pump. Do NOT vacuum liquid through the 
nozzle. The filter element is not effective in 
catching any form of liquid, vapor,  as well as 
small particles.

Содержание V-460 Series













































































Отзывы:

Нет отзывов