Van Der Stahl V-460 Series, Руководство по эксплуатации, Страница: 31 / 76

V-460/610 Series Operating Instructions Ver.2.04E
31
Explanation of each button on the control panel
The following buttons are used to set seal conditions.
MENU button
＝ Press to show following menus on the
display: “1 entry,” “2 change,” “3 delete,” “4
NZ stroke,” and “5 maintenance.”
ENT button
＝
Press to confirm setting.
＝ Press to stop operation while machine is
sealing or vacuuming. ( ※ 1)
UP/DOWN arrow buttons
＝ Press to show different setting mode.
＝ Press to increase or decrease numerical
setting value.
RIGHT/LEFT arrow buttons
＝ Press to show different setting mode.
＝ Press to move the cursor to the desired
position.
Digital display
See "8-5 Operation
procedures" for more detail.
8-4 How to set the control unit
Warning
(
※
1
) If the operation is suspended when the lever is
in sponge position, the lever goes completely down
before returning to the initial position. Please be
careful not to pinch any foreign objects such as
your fingers. (See “8-3 Explanation of terms for the
detail of technical words.)