Van Der Stahl V-460 Series, Руководство по эксплуатации, Страница: 59 / 76

V-460/610 Series Operating Instructions Ver.2.04E
59
Model name
Heat
temp
Heat
dwell
Cool
temp
Vacuum
time
Vacuum
setting
Nozzle
stroke
Weight
Machine
dimensions
Seal
height
Table
dimensions
V-460(C)-5
60 〜
250°C
/
140 〜
480°F
0.0 〜
2.0sec.
40°C/
100°F 〜
Set heat
temp
0.1 〜
99.9 s
‐
1
〜
‐
100kPa
10 〜
80mm
55 ｋｇ
W 570×
D 785×
H 415mm
（ including
table
）
280mm
W 470 x
D 350mm
V-460(C)-10 55 ｋｇ
V-460(C)-5D 55
ｋｇ
V-460(C)-10D 60
ｋｇ
V-460(C)-S-5 54
ｋｇ
V-460(C)-S-10 54
ｋｇ
V-460(C)-S-5D 54 ｋｇ
V-460(C)-S-10D 59 ｋｇ
V-460(C)-H-5 58 ｋｇ
V-460(C)-H-10 58 ｋｇ
V-460(C)-H-5D 58
ｋｇ
V-460(C)-H-10D 63
ｋｇ
V-610(C)-5 57
ｋｇ
W 676×
D 785×
H 415mm
（
including
table
）
W 620 x
D 350mm
V-610(C)-10 62
ｋｇ
V-610(C)-5D 57
ｋｇ
V-610(C)-10D 62 ｋｇ
V-610(C)-S-5 56 ｋｇ
V-610(C)-S-10 61 ｋｇ
V-610(C)-S-5D 56 ｋｇ
V-610(C)-S-10D 61
ｋｇ
V-610(C)-H-5 60
ｋｇ
V-610(C)-H-10 65
ｋｇ
V-610(C)-H-5D 60
ｋｇ
V-610(C)-H-10D 65 ｋｇ
！
① Structurally, the nozzle vacuum system will cause attainable vacuum level to be erratic when operating the machine in low vacuum of between -1 to
-20 kPa. Additional discussion is necessary for low vacuum operation.
The button on the control unit allows you to set the vacuum level from -1 to -100 kPa, but the actual vacuum level will depend on the ability of the
pump mounted.
② The cooling temperature can only be set at a lower temperature than the heating temperature. If the cooling temperature is set too close to the
heating temperature, cooling will not occur, shortening the life of parts such as the heating element and center-dry tape.
●
Optional items
※
Outside printing device FEP-VA-N2: this is a factory installed option. Attaching the FEP-VA-N2 printer after the product delivery requires installation
and adjustment by a technician from the manufacturer or dealer.
※ Sealing area safety cover: it covers the seal area with a transparent plate to prevent pinching.
！ ！
② ①