Van Der Stahl V-460 Series, Руководство по эксплуатации, Страница: 45 / 76

V-460/610 Series Operating Instructions Ver.2.04E
45
7
9
8
[Setting range: 40°C/100°F ~ Up
to the set heating temperature
by the user]
Place a pouch to the seal area.
Depress an air pedal. (1st)
See “8-4 How to set the control unit” >>> “8-4-7 Set cooling
temperature”.
Place a pouch to the seal area and insert the vacuum nozzle in it.
Stretch the pouch out by pulling both sides by hands.
The vacuum nozzle moves forward.
11
12
10
Depress the air pedal. (3rd)
Sealing is complete.
Depress the air pedal. (2nd)
(“Timer vacuum” operation cont’d)
When you depress the foot switch for the forth time, the following
procedures (from 1 to 7) are performed automatically.
1 Vacuuming starts. Vacuum lamp turns ON.
2
When the set-up time is passed, vacuum is finished. Vacuum
lamp turns OFF.
3 Nozzle returns to the back position.
4 Pressure lever closes and sealing starts. Heating lamp turns
ON.
6
Cooling is finished. (Cooling lamp turns OFF.)
7 Sealing process is complete. The pressure lever opens.
A pressure lever descends and fastens a pouch with sponge
rubbers.
5 After the heating is finished (heating lamp is turned OFF),
cooling lamp turns ON.
Refer to “7-10 Turn OFF the circuit breaker and power switch” to
turn OFF the machine. When not using the machine for a while,
unplug the machine from the outlet.