![background image](http://html1.mh-extra.com/html/vamp/vamp-150/vamp-150_operation-and-configuration-instructions_3332251021.webp)
VAMP Ltd
Motor protection relay
Operation and Configuration
VAMP 150
VM150.EN005
Vamp 24h support phone : +358 (0)20 753 3264
21
5.2.
Enabling and disabling protection
functions (ENABLE)
Via the submenus of the ENABLE menu, all the protection
functions can be enabled (ON) or disabled (OFF):
ENABLE I
•
Overcurrent, stall protection, unbalance, phase sequence,
overload, undercurrent and arc protection stages (I> I>>,
I>>>, Ist>, I
2
>, I
2
>>, T>, I< and ArcI>)
ENABLE Io
•
Residual current stages and residual arc protection (Io>,
Io>>, and ArcIo>)
Ena CBFP
•
Circuit Breaker Failure Protection stage (CBFP)
Ena N>
•
Frequent start protection (N>)
RESET
•
Reset the software of the VAMP 150 relay and reset latches
(Reset and Latch)
NOTE!
Disabling a protection function will remove the item from the
menu.
5.3.
Setting protection function parameters
The settings of the selected protection functions can be read
and set separately in the submenus of each function.
Available protection stages
•
I>, I>>, I>>>, Ist>, T>, I
2
>, I
2
>>, I<, ArcI> (IL SETTING)
•
Io>, Io>>, ArcIo> (Io SETTING)
•
N> (N> Set)
•
CBFP (CBFP Set)