![background image](http://html1.mh-extra.com/html/vamp/vamp-150/vamp-150_operation-and-configuration-instructions_3332251025.webp)
VAMP Ltd
Motor protection relay
Operation and Configuration
VAMP 150
VM150.EN005
Vamp 24h support phone : +358 (0)20 753 3264
25
6.
PC software
6.1.
PC user interface
The PC interface is intended to be used for onsite
parameterization of the relay and for reading of measured
values to a computer or loading of the relay software from a
computer.
The RS 232 serial port is available for the connection of a local
PC on the front panel of the relay. To connect a PC to the serial
port use a connection cable of type VX 003-3.
6.1.1.
Using the VAMPSET program
See separate user’s manual for the VAMPSET software,
VMV.EN0xx. If the VAMPSET software is not available please
download it from www.vamp.fi.
6.2.
Remote control connections
The protection relay communicates with higher-level systems,
e.g. remote control systems, via the serial port (REMOTE) on
the rear panel of the relay.
ModBus, SPA-Bus, IEC 60870-5-103, ProfiBus or ModBus TCP
can be used as REMOTE communication protocols (see details
in Chapter 2.5.2. in technical description).
Additional operation instructions for various bus types are to
be found in their respective manual.