Technical description
13 Revision history
300
VAMP 24h support phone +358 (0)20 753 3264
VM259.EN007
Firmware revision history
5.46
Programmable inverse delay curves added.
5.56
Month max values added.
Number of virtual outputs increased to 6.
Number of logic outputs increased to 20.
Auto-reclose updated (reclaim time setting and active signal
for each shot).
5.68
DNP 3.0 protocol added.
Extended self diagnostics.
Inrush & cold load detection added (fast block operation).
Running hour calculation added.
Display backlight controlling with DI.
Support for analog output modules added to External I/O
protocol.
Auto-reclose updated(blocking of shots)
5.75
Adjustable hysteresis for U>>, U>>>, U<<, U<<<.
I
02
> & I
02
>> renamed as I
0
>>> & I
0
>>>>.
Increased setting range for T>
Voltage measurement mode description modified
6.6
IEC60870-5-101 (unbalanced) added.
Auto detection added for External I/O (optional).
VCM 61850 module detection added
NOTE!
Require VAMPSET (2.1.2) or newer version. Old files cannot
be used with 6.x firmware.
6.12
IEC60870-5-101 (unbalanced) updated.
Increased I
0dir
> setting range
6.23
Nonvolatile fault logs.
Updates for I/O cards.
6.28
Transient intermittent earth fault stage I
0int
>.
6.43
RMS mode added to I>.
Short sircuit distance improvements.
Max op. time extended to 7200s for programmable delay
curves.
10.9
New CPU card with optional inbuilt Ethernet interface and
61850 protocol, distance protection and line differential
protection.
10.17
Digital input sync supports DCF-77 timecode.
Support for SNTP version 4.
10.19
VIO12 RTD module support added.
10.26
VCM RTD option module support added.
IEC 61850 updates including GOOSE added.
UTF-8 support for local HMI panel (Russian) added.