Page 10
Thermal switch.
The Thermal Switch should be fitted to the inside of the Diverter Box as in
figure 4. Secure using the nut and bolt supplied. Never modify the fixing bracket and
always ensure that the switch is fitted correctly. NEVER USE THE STOVE IF THE
THERMAL SAFETY SWITCH HAS BEEN REMOVED OR IF IT IS DAMAGED IN ANY
WAY.
Diverter box.
Locate the diverter box to the rear of the stove body and secure in place using the
bolts and washers supplied.
Burner module.
-
Ensure the rear ceramic support is fitted as shown in Fig 5 with the three screws
supplied in with the knob assy kit onto the rear of the burner module.
-
Secure the control knob assembly to the
gas valve, the screw tail should secure onto
the flat on the gas valve spindle.
- Connect the thermal switch leads to the
tags mid way along the thermocouple.
-
Locate the burner assembly inside the
stove body as in Fig 5 (The outer front of
the stove is not shown for clarity).
The rear leg of the burner should sit on the
rear of the casting. Secure using the three
screws supplied. The screw locations are
shown in figure 5).
-
Secure the control knob assembly to the
gas valve, the screw tail should secure onto
the flat on the gas valve spindle.
©
GDC Group Ltd. 2014
Figure 5.
Figure 4.
INSTALLER GUIDE
