Down draught deflector.
-
The down draught deflector is secured in place using the upper front bolt and nut
that secure the cast collar to the outside of the cast body. Unscrew and remove the
nut and washer from inside the top of the casting body. Position the down draught
deflector as in figure 3. It MUST be sealed against the top of the stove casting. It is
important that it sits on top and between the raised cast areas on the rear of the stove
body (See figure 3). Secure in place using the nut and washer removed previously.
Page 9
©
GDC Group Ltd. 2014
Figure 2.
INSTALLER GUIDE
Figure 3.
