VALCO MELTON D-90, Руководство пользователя

Страница: 42 / 150

5-3 Valco Cincinnati, Inc.
Section 5 – Setup MM125 - D-90 Hot Melt Unit
Power On/Off
and Standby
Mode
The Power Disconnect Switch is located on the front of the electrical cabinet
(see picture below). The Power Disconnect Switch controls the power to the
system.
The Standby Button controls the power to the Heater circuits. Press the
Standby Button once. The display screen will come on and the Standby LED
will illuminate green, indicating that the unit is on. When the Standby Button is
pressed again, the temperature screen will go blank, the Standby LED will
illuminate orange and the status bar will be active, indicating the unit is in
Standby Mode.
When the unit is in Standby Mode, the
internal clock is still working. The clock
will turn the unit off and on in the Timer
Mode, as usual. If the Power Switch is
turned off, however, the internal clock
will NOT automatically turn the unit on
and off; the internal clock has no power
when the system is off.
Power Disconnect Switch