VALCO MELTON D-90, Руководство пользователя

Страница: 105 / 150

9-1 Valco Cincinnati, Inc.
SECTION 9 - SPECIFICATIONS SECTION 9 - SPECIFICATIONS
SECTION 9 - SPECIFICATIONS SECTION 9 - SPECIFICATIONS
SECTION 9 - SPECIFICATIONS
General
It is the purchaser’s responsibility to ensure that all local, county, state, and
national codes, regulations, rules, and laws relating to safety and safe
operating conditions are met and followed.
#
Weight (maximum) includes the unit with all options installed, coupled with
the weight of the crate.
* Test run with standard adhesive at 10,000 cPs. Melt rate will vary with input
voltage and adhesive.
** Pump rate based on a motor speed of 100 rpm and material with a specific
gravity of 1.0.
Height 53 inches (1,346 mm)
Width 30 inches (762 mm)
Depth 41 inches (1041 mm)
Tank Capacity 90 kg (200lb)
Drop-In Grid Standard
Melt Rate 100 kg/hr (220 lb/hr)
Gear Pump
0.7 lb/hr (0.3 kg/hr) - 41 lb/hr (19 kg/hr)
1.4 lb/hr (0.6 kg/hr) - 85 lb/hr (39 kg/hr)
3 lb/hr (1.3 kg/hr) - 170 lb/hr (77 kg/hr)
6 lb/hr (2.5 kg/hr) - 334 lb/hr (152 kg/hr)
Gear Pump Control A.C. with line-tracking feature for variable speeds
Number of Pumps 1-2
Number of Hoses/Guns 1-6
Hose Fittings #6 (3/8"), #8 (1/2"), #12 (3/4") and #16 (1") options
Pressure Safety Relief
Manual relief with internal safety relief
Pneumatic relief with manual relief
Uniflow 12V with manual relief
Uniflow 24V with manual relief
Temperature Control UTC-20 Microprocessor PID 16-Zone capable
Voltage 380, 400, 440, 480, 575, 595 VAC, 3PH, 50/60 Hz
Level Sensors Optional Low and High Level Sensors
Pressure Monitor Optional
Applications Profile Wrapping, Laminating, Book Binding
SPECIFICATIONS