Chapter 4 _________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 113
NOTE
Commands have to be typed in the same case as indicated in the help
texts, usually in the lower case.
The command name and the following parameters are always
separated by a space. Pressing ENTER (return) will execute the
command so that MAWS reads the typed command.
You can use BACKSPACE to delete the last typed character.
Use CTRL+P (hold down the CTRL key and press P) to repeat the
previously typed command. Use CTRL+P (Previous) and CTRL+N
(Next) to scroll through the list of previously typed commands. When
you find the command you would like to repeat, simply press ENTER.
File commands (dir, del, copy, move, verify) can be aborted with
CTRL+C.
Closing MAWS Service Connection
If your MAWS connection works via a modem, you must remember
to close the line after you finish working with MAWS. To close the
connection, choose
Hangup
from the
Connection
menu.
If your MAWS connection is direct, you do not need to close the
service connection separately. The program closes the service
connection automatically after 5 minutes.
Modifying Station Settings
In MAWS Terminal, you can modify the station settings. When you
choose the
Set Stations Settings
option from the
Tools
menu, the
window appears. See Figure 106 on page 114. The separate boxes in
the left side of the window are for setting the common parameters to a
station. The
MAWS
static
parameters
list shows the additional
parameters, also those that have been set directly with the MAWS
Terminal software.
