Autoframer Commands
Commands to manage and adjust Autoframing fall roughly into three categories.
Status commands:
n
autoframer enabled
n
autoframer paused
Shot definition commands:
n
camera optical-zoom
n
autoframer shot-margin
n
autoframer max-electronic-zoom
n
autoframer buffer-zone
Autoframing behavior adjustment commands:
n
autoframer sensitivity
n
autoframer responsiveness
n
autoframer initial-persistence
n
autoframer persistence
n
autoframer max-speed
n
autoframer noise-threshold
n
autoframer tri-sync-motion
n
autoframer forced-wait-time
autoframer enabled
Enable or disable Autoframing. This is normally on. Use the
autoframer paused
command to switch
to manual mode with the intent of resuming Autoframing.
Synopsis
autoframer enabled { get | off | on | toggle }
Options
get
Returns the current enable state for
Autoframing
off
Turns off Autoframing
on
Turns on Autoframing
toggle
Changes the Autoframing state
Examples
>
autoframer enabled off
OK
>
Stops Autoframing, placing the camera in manual mode.
>
autoframer enabled get
autoframer enabled:
false
OK
>
Returns the current state of Autoframing.
Complete Manual for the IntelliSHOT Auto-Tracking Camera
42