RF Remote Quick Reference
Indicator and Power button
– Set the camera to standby
mode, or return to full-power mode.
Function buttons
– Reserved for future use.
Arrow buttons
– Pan and tilt. Autoframing pauses if you use
these buttons.
Home button
– Resumes Autoframing if it is paused.
Network button
– Display the camera's IP address on the
video output.
Pairing button
– Use when pairing the remote with the
camera.
Mute button
– Mute the microphone(s).
Reserved for future use.
/– button
– Increase or decrease the volume from
the connected speaker.
Focus +/– buttons
– Adjust the focal distance in or out,
when Manual focus mode is selected.
Zoom +/– button
– Increase or decrease the zoom.
Auto and Man buttons
– Select automatic or manual focus.
Preset buttons
– Set, clear, or select preset shots.
Autoframing pauses if you use these buttons.
Other Things to Know About the Remote
Here are some common situations in which the remote can behave in ways you don't expect.
Environments with cameras in adjacent rooms
– If the remote is currently paired to a camera and
within range of that camera, it will not pair with another camera.
The remote goes to standby mode after a brief period of inactivity
– To return the remote to its
normal operating state, press a button.
The remote is no longer paired after restoring the camera's factory defaults
– If you restore
factory defaults on the camera, you will need to pair it with the remote again.
Complete Manual for the IntelliSHOT Auto-Tracking Camera
36
