Basic Connections
Here is an example of how the camera might be set up in a medium-size conference room. In this setup,
a PC uses a unified communications conferencing application to manage the camera and connected
microphones and speaker.
Pro Tip
Label all cables at both ends.
Installing the Camera and Connecting Power
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in
equipment damage and will void the warranty.
1. Connect all required cables to the camera.
2. Slide the camera into the mount.
3. Secure the cable cover to the mount.
4. Connect the mid-span power injector to mains power.
About Inverted Installation
If you use an inverted mount, you will need to select the camera's Image Flip setting when configuring
behavior and performance. Image Flip orients the video image correctly and sets the camera to respond
appropriately to tilt commands. See
for more information.
Complete Manual for the IntelliSHOT Auto-Tracking Camera
7
