system reboot
Reboots the system either immediately or after the specified delay. Note that a reboot is required when
resetting the system to factory defaults (system factory-reset).
Synopsis
system reboot [<seconds>]
Options
<seconds>
The number of seconds to delay the reboot.
Examples
>
system reboot
OK
>
The system is going down for reboot NOW!intellishot-D8-80-39-62-A7-C5
Reboots the system immediately.
>
system reboot 30
Reboots the system in 30 seconds. The response is in the same form; the system
message appears at the end of the delay.
system factory-reset
Gets or sets the factory reset status. When the factory reset status is on, the system will resets to factory
defaults on the next reboot.
Synopsis
system factory-reset { get | on | off}
Options
get
Returns the camera's current factory reset
status.
on
Enables factory reset on reboot and returns he
camera's current factory reset status.
off
Disables factory reset on reboot and returns
he camera's current factory reset status.
Examples
>
system factory-reset get
factory-reset (software):
off
OK
>
Returns the factory reset status.
This evaluates the most recent
system factory-reset
on or off command, if
one has been received.
>
system factory-reset on
factory-reset (software):
on
OK
>
Enables factory reset upon reboot.
Note
This command does not initiate a factory reset. The factory reset takes place on
the next reboot.
Complete Manual for the IntelliSHOT Auto-Tracking Camera
66