Parameter lists
vacon • 5
24-hour s358 (0)40 837 1150 • Email: [email protected]
3.
PARAMETER LISTS
On the next pages you will find the lists of parameters within the respective parameter groups. The
parameter descriptions are given on pages 22 to 53.
Column explanations:
Code
= Location indication on the keypad; Shows the operator the present param. number
Parameter = Name of parameter
Min
= Minimum value of parameter
Max
= Maximum value of parameter
Unit
= Unit of parameter value; Given if available
Default
= Value preset by factory
Cust
= Customer’s own setting
ID
= ID number of the parameter
= In parameter row: Use TTF method to program these parameters.
= On parameter code: Parameter value can only be changed after the FC has been stopped.
3.1
Monitoring values (Control keypad: menu M1)
The monitoring values are the actual values of parameters and signals as well as statuses and
measurements. Monitoring values cannot be edited.
See the product’s user’s manual for more information.
Code
Parameter
Unit ID
Description
V1.1
Output frequency
Hz
1
Output frequency to motor
V1.2
Frequency reference
Hz
25
Frequency reference to motor control
V1.3
Motor speed
rpm 2
Motor speed in rpm
V1.4
Motor current
A
3
V1.5
Motor torque
%
4
Calculated shaft torque
V1.6
Motor power
%
5
Motor shaft power
V1.7
Motor voltage
V
6
V1.8
DC link voltage
V
7
V1.9
Unit temperature
C
8
Heatsink temperature
V1.10
Analogue input 1
V
13
AI1
V1.11
Analogue input 2
mA
14
AI2
V1.12
Analogue input 3
1543
AI3
V1.13
Analog Output1
26
V1.14
DIN1, DIN2, DIN3
15
Digital input statuses
V1.15
DIN4, DIN5, DIN6
16
Digital input statuses
V1.16
RO1, RO2, RO3
1516
Relay output statuses
V1.17
RO4, RO5, RO6
1574
Relay output statuses
V1.18
Temp reference
°C
1500
V1.19
Actual temperature
°C
1501
V1.20
Temp error value
°C
1502
V1.21
PID output
%
23
In % of the max. output value
V1.22
Inlet pressure
bar
1511
PT11
Table 2. Monitoring values
