Description of parameters
vacon • 47
24-hour s358 (0)40 837 1150 • Email: [email protected]
733
Response
to
fieldbus
fault
(2.7.21)
Set here the response mode for the fieldbus fault if a fieldbus board is used. For more
information, see the respective Fieldbus Board Manual.
See parameter ID732.
734
Response to slot
fault
(2.7.22)
Set here the response mode for a board slot fault due to missing or broken board.
See parameter ID732.
735
Actual
value
supervision
function
(2.7.22)
0 = Not used
1 = Warning, if actual value falls below the limit set with par. ID736
2 = Warning, if actual value exceeds the limit set with par. ID736
3 = Fault, if actual value falls below the limit set with par. ID736
4 = Fault, if actual value exceeds the limit set with par. ID736
736
Actual
value
supervision
limit
(2.7.24)
With this parameter you can set the limit (in percent) of actual value supervised by par. ID735.
737
Actual value supervision delay
(2.7.25)
Set here the delay for the actual value supervision function (par. ID735)
If this parameter is in use, the function of par. ID735 will be active only when the actual value
stays outside the defined limit for the time determined by this parameter.
