Vacon NXP series Скачать руководство пользователя

Страница: 6 / 102

SAFETY

vacon • 5

SAFETY

1.1 Warnings

The Vacon NX frequency converter is meant for fixed installations only.

Do not perform any measurements when the frequency converter is
connected to the mains.

Do not perform any voltage withstand tests on any part of Vacon NX.

There is a certain procedure according to which the tests shall be per-
formed. Ignoring this procedure may result in damaged product.

The frequency converter has a large capacitive leakage current.

If the frequency converter is used as a part of a machine, the machine
manufacturer is responsible for providing the machine with a main

switch (EN 60204-1).

Only spare parts delivered by Vacon can be used.

The motor starts at power-up if the start command is 'ON'. Furthermore,

the I/O functionalities (including start inputs) may change if parameters,
applications or software are changed. Disconnect, therefore, the motor if

an unexpected start can cause danger.

Prior to measurements on the motor or the motor cable, disconnect the
motor cables from the frequency converter.

Do not touch the components on the circuit boards. Static voltage dis-

charge may damage the components.

1.2 Safety instructions

The components of the power unit of the frequency converter and all

cabinet mounted devices are potentially live when Vacon NX is connected
to mains potential. Coming into contact with this voltage is extremely

dangerous and may cause death or severe injury.

The motor terminals U, V, W and the DC-link/brake resistor terminals –/+
and all other mains devices are potentially live when Vacon NX is con-

nected to mains, even if the motor is not running.

After disconnecting the frequency converter from the mains, wait until
the fan stops and the indicators on the keypad go out (if no keypad is

attached see the indicators on the cover). Wait 5 more minutes before
doing any work on Vacon NX connections. Do not even open the cabinet

door before this time has expired.

The control I/O-terminals are isolated from the mains potential. How-
ever, the relay outputs and other I/O-terminals may have a dangerous

control voltage present even when Vacon NX is disconnected from mains.

Before connecting the frequency converter to mains make sure that the
Vacon NX front and cable covers as well as the cabinet doors are closed.

ONLY A COMPETENT ELECTRICIAN MAY CARRY OUT

THE ELECTRICAL INSTALLATION

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]

Содержание NXP series







































































































Результаты поиска

Содержание NXP series

Отзывы:

Похожие инструкции для NXP series

Бренды по названию

Популярные бренды

Vacon NXP series, Руководство пользователя

Результаты поиска

Содержание NXP series

Отзывы:

Похожие инструкции для NXP series

Бренды по названию

Популярные бренды