Vacon NXP series, Руководство пользователя

Страница: 68 / 102

CONTROL KEYPAD vacon • 67
9.2 Keypad push-buttons
The Vacon alphanumeric control keypad features 9 push-buttons that are used for the control of the
frequency converter (and motor), parameter setting and value monitoring.
Figure 9-2. Keypad push-buttons
9.2.1 Button descriptions
reset
= This button is used to reset active faults (see Chapter 9.3.4).
select
= This button is used to switch between two latest displays. May be useful
when you want to see how the changed new value influences some other
value.
enter
= The Enter button serves for:
1) confirmation of selections
2) fault history reset (2…3 seconds)
= Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
= Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
= Menu button left
Move backward in menu.
Move cursor left (in parameter menu ).
Exit edit mode.
Hold down for 3 seconds to return to main menu.
= Menu button right
Move forward in menu.
Move cursor right (in parameter menu ).
Enter edit mode.
= Start button.
Pressing this button starts the motor if the keypad is the active control
place. See Chapter 9.3.3.
= Stop button.
Pressing this button stops the motor (unless disabled by parameter
R3.4/R3.6). See Chapter 9.3.3.
start
stop
+
-
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com