Vacon 100 INDUSTRIAL Скачать руководство пользователя

Страница: 52 / 56

vacon • 50

APPENDIX 2 - CONTROL AND STATUS WORD

Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/

10.

APPENDIX 2 - CONTROL AND STATUS WORD

10.1

Control Word bit description

The Control word is composed of 32 bits. FBFixedControlWord consist of the first 16 bits. FBGen-
eralControlWord consist of the remaining 16 bits. While the functionality of FBFixedControlWord is
fixed in the VACON

standard applications, the functionality of FBGeneralControlWord is totally

application specific and can vary even in the VACON

standard applications.

The meanings of FBFixedControlWord bits are described below. Unused bits have to be set to zero.

NOTE!

This table is valid for VACON

standard applications. VACON

100 HVAC may not support all

functions. See Table 52.

Table 51. Control Word

Bit

Function

Value

Description

Start/Stop

Stop request from fieldbus.

Run request from fieldbus.

Direction

Requested direction is "FORWARD".

Requested direction is "REVERSE".

Fault reset

No action.

Rising edge (0->1) = Active faults, alarms and
infos are reset.

Stop mode 1

Stop mode is unmodified.

Stop mode is overridden to "Coasting".

Stop mode 2

Stop mode is unmodified.

Stop mode is overridden to "Ramping".

Quick ramp time

Normal deceleration ramp time.

Deceleration ramp time is switched to shorter
than normal.

Freeze Setpoint

Changes in the setpoint value from fieldbus (FB
Speed Reference) are taken into use by the appli-
cation.

Changes in the setpoint value from fieldbus (FB
Speed Reference) are not taken into use by the
application.

Setpoint to Zero

The setpoint value from fieldbus is taken from FB
Speed Reference.

The setpoint value from fieldbus is changed to 0.

Request Fieldbus

Control

Control Place is as parameterized in the drive
(unchanged).

Control Place is overridden to Fieldbus Control.

Request Fieldbus

Reference

Source of the setpoint value is as parameterized
in the drive (unchanged).

Source of the setpoint value is overridden to
Fieldbus.

Jogging 1

No action.

Jogging request with reference 1.

Содержание 100 INDUSTRIAL

























































Результаты поиска

Содержание 100 INDUSTRIAL

Отзывы:

Похожие инструкции для 100 INDUSTRIAL

Бренды по названию

Популярные бренды

Vacon 100 INDUSTRIAL, Руководство пользователя

Результаты поиска

Содержание 100 INDUSTRIAL

Отзывы:

Похожие инструкции для 100 INDUSTRIAL

Бренды по названию

Популярные бренды