V2 ZARISS Series, Руководство пользователя

Страница: 50 / 132

E
N
G
L
IS
H
48
7 - ACCESSING THE CONTROL
UNIT SETTINGS
Once initialisation is performed (even without time self-training), it
will be possible to access the various control unit functions,
including initialisation itself.
1. Press and hold the OK key until the display shows the menu
desired
2. Release the OK key: the display will show the first item in the
sub-menu
-CFG Rapid configuration
-PrG Programming the control unit (full menu)
-Cnt Cycle counter
-APP Self-training the working times
-dEF Loading the default parameters
-ini Control unit initialisation
8 - RAPID CONFIGURATION
Rapid configuration is a menu allowing the main control unit
parameters to be programmed with a few operations.
It is essential the initialisation procedure has already been
performed (even without time self-training) in order to
perform rapid configuration.
1. Press and hold the OK key until the display shows the -CFG
menu
2. Release the OK key: the display will show the first item in the
Pot menu.
Pot. Power adjustment
SEnS Obstacle sensor adjustment
LoG. Operation logic
FinE Exit the menu