N
E
D
E
R
L
A
N
D
S
154
GEBRUIK VAN DE TOETSEN MENU, UP EN
DOWN VOOR DE PROGRAMMERING
De programmering van de functies en van de tijden van de
stuurcentrale vindt plaats in een speciaal configuratiemenu dat
geactiveerd kan worden en waarbinnen u zich kunt verplaatsen
met de toetsen DOWN, MENU en UP die zich onder het display
bevinden.
Om de programmeerwerkwijze te activeren terwijl het display
het controlepaneel weergeeft, drukt u net zolang op de toets
MENU tot de tekst
t.AP
op het display verschijnt.
Het configuratiemenu bestaat uit een lijst items die
geconfigureerd kunnen worden. De afkorting die op het display
verschijnt duidt op het item dat op dat moment geselecteerd is.
Door op DOWN te drukken gaat u over naar het volgende item
en door op UP te drukken keert u terug naar het vorige.
Drukt u op de toets MENU dan wordt de huidige waarde van het
geselecteerde item getoond en kan deze waarde eventueel
gewijzigd worden.
Het laatste menu-item (
FinE
) stelt u in staat de uitgevoerde
wijzigingen te bewaren en terug te keren naar de gewone
werking van de stuurcentrale. Om de configuratie niet te
verliezen bent u verplicht via dit menu-item de
programmeerwijze te verlaten.
LET OP: indien gedurende één minuut geen
handelingen verricht worden verlaat de stuurcentrale de
programmeerwijze zonder de instellingen te bewaren en
gaan de doorgevoerde wijzigingen verloren.
Door de toets DOWN ingedrukt te houden kunt u de items van
het configuratiemenu snel langslopen, tot het item FinE getoond
wordt. Door de toets UP ingedrukt te houden kunt u de items
snel achterwaarts langslopen tot het item dEF getoond wordt.
Op deze wijze kan het einde of het begin van de lijst snel bereikt
worden.
Er bestaan drie soorten menu’s:
• Functiemenu
• Tijdmenu
• Waardemenu
Instelling van de functiemenu’s
De functiemenu’s maken het mogelijk een functie te kiezen uit
een groep van mogelijke opties. Wanneer u een functiemenu
binnengaat wordt de optie getoond die op dat moment actief is.
Met de toetsen DOWN en UP kunt u de beschikbare opties
bekijken. Drukt u op de toets MENU dan wordt de weergegeven
optie geactiveerd en keert u terug naar het configuratiemenu.
Instelling van de tijdmenu’s
De tijdmenu’s maken het mogelijk de duur van een functie in te
stellen. Wanneer u een tijdmenu binnengaat wordt de waarde
weergegeven die op dat moment ingesteld is. De weergave is
afhankelijk van de ingestelde waarde:
• De tijden die korter zijn dan één minuut worden in dit
formaat getoond:
iedere druk op de toets UP doet de ingestelde tijd toenemen met
een halve seconde. Iedere druk op de toets DOWN doet de
ingestelde tijd afnemen met een halve seconde.
• De tijden tussen 1 en 10 minuten worden in dit formaat
getoond:
iedere druk op de toets UP doet de ingestelde tijd toenemen met
5 seconden. Iedere druk op de toets DOWN doet de ingestelde
tijd afnemen met 5 seconden.
• De tijden die langer zijn dan 10 minuten worden in dit
formaat getoond:
iedere druk op de toets UP doet de ingestelde tijd toenemen met
een halve minuut. Iedere druk op de toets DOWN doet de
ingestelde tijd afnemen met een halve minuut.
Door de toets UP ingedrukt te houden kunt u de waarde van de
tijd snel verhogen, tot het maximum dat voor dit item voorzien
wordt. Door de toets DOWN ingedrukt te houden kunt u de
waarde van de tijd snel verlagen, tot de waarde
0.0”
bereikt
wordt.
In enkele gevallen staat de instelling van de waarde 0 gelijk aan
de uitschakeling van de functie. In dit geval wordt dan in plaats
van
0.0”
“
no
” weergegeven.
Drukt u op de toets MENU dan bevestigt u de getoonde waarde
en keert u terug naar het configuratiemenu.
Instelling van de waardemenu’s
De waardemenu’s zijn gelijk aan de tijdmenu’s maar de
ingestelde waarde is om het even welk nummer.
Door de toets UP of de toets DOWN ingedrukt te houden neemt
de waarde langzaam toe of af.