PAGE 1 OF 21
1120 IH-7155
DOCK BUG DOORS
1-800-295-5510
uline.com
H-7155, H-7156
H-7157
PARTS
ASSEMBLY
TOOLS NEEDED
Hammer Drill
Power Drill
Ladder x 2
Locking Pliers
36" Bar Clamp x 4
Carpenter's Level
Carpenter's
Square
Mounting Angle x 2
Drum Mounting Bracket
(Bearing) x 1
3/8" Wall Anchor x 8
(For Concrete Installation)
(Not Included)
3/8" Lag Screw x 8
(For Wood Installation)
(Not Included)
Brush Seal Bar x 1
Guide Track x 2
Screen Roller Drum x 1
Brush Seal x 1
Rear Spreader Plate
with Vinyl Flap x 1
Top Spreader Angle x 1
Lock Strap x 2
Drum Mounting Bracket
(Spring) x 1
Lock Strap
Hardware x 2
Lock Plate x 1
Socket and
Wrench Set
3/8" Masonry
Drill Bit
Self-Tapping
Screw x 24
NOTE: It is recommended that two
people install the door together.
CAUTION! When cutting or drilling
into a wall or ceiling, do not damage
electrical wiring and other hidden
utilities.
1. Drill four mounting holes on the narrow side
of both mounting angles. Holes should be
placed 1" from each edge and equally
spaced between those holes. (See Figure 1)
Figure 1
1" from
Edge
Mounting
Angle
1" from
Edge
1" from
Edge
Para Español, vea páginas 8-14.
Pour le français, consulter les pages 15-21.
