u
Remove drawer as shown in the diagram.
Drawer on telescopic rails
Fig. 20
Make sure that the following requirements are fulfilled:
q
Drawer is completely pulled out (see Fig. 116) .
Partial pull-out fridge compartment:
Fig. 21
u
Pull the drawer out halfway Fig. 21 (1).
u
Lift at the front Fig. 21 (2).
u
Insert left rail Fig. 21 (3).
u
Insert right rail Fig. 21 (4).
u
Remove the drawer to the front Fig. 21 (5).
Fig. 22
If the rails are not yet fully pushed in after removing the
drawer:
u
Push the rails in completely.
7.6.2 Inserting the drawer
Drawer on glide rails
Fig. 23
u
Insert the drawer as shown in the diagram.
Drawer on telescopic rails
Partial pull-out fridge compartment:
Fig. 24
u
Slide the rails in.
u
Place the drawer on the rails.
u
Push all the way back.
7.7 Lid for ColdFresh with humidity
control
You can remove the compartment cover for cleaning.
7.7.1 Removing the compartment cover
Ensure that the following conditions are met:
q
Bottle shelf is removed (see 7.5 Adjustable bottle shelf) .
Fig. 25
If the drawers are removed:
u
Pull the lid forward (1) until it reaches the opening in the
retaining parts.
u
Lift from the back and pull it up and out (2).
7.7.2 Inserting the compartment cover
Fig. 26
If the text THIS SIDE UP points upwards:
u
Insert the lip of the cover over the opening of the rear
bracket (1) and click into place (2).
u
Position the cover where you want it .
Features
74
* Depending on model and options
