57
English
M2 USER MANUAL
In SWIM mode and during surface exercise,
the M2 displays the count of strokes or heart
rate on the top row, the elapsed time on the
middle row and the converted total distance
on the bottom row.
5.
M2 ACCESSORIES
5.1 HR belt
The M2 receives the signal of various low
frequency heart rate belts.
The new SCUBAPRO heart rate belt
features a patented skin temperature
measurement and transmission that is
supported by the M2.
HR belt positioning is shown below. Adjust
the strap so that it is comfortable to wear
but stays in place. When wearing a diving
suit the HR belt must be directly against the
skin. Moisten the electrode areas if your
skin is dry or when wearing a dry suit.
F
NOTE: The front side of the temperature
HR belt should be against the suit and
not covered by body parts.
You must enable the heart rate setting on
your M2. Refer to the section
Heart rate
limits
and
Skin temperature
to learn how
to do this.
After a dive rinse the heart rate belt in fresh
water, dry it and store in a dry place.
For HR belts with a battery cap, we
recommend having the battery changed
by an authorized SCUBAPRO dealer. With
completely sealed HR belts the battery
cannot be changed.
Check the operation conditions and depth
rating of the HR belt from the unit or its
package.
5.2 Nylon arm strap
Divers wearing a thick neoprene wetsuit
or drysuit may prefer a longer arm strap.
The M2 can be equipped with a one-piece
31cm/12in SCUBAPRO nylon arm strap.
F
NOTE: The M2 arm strap is attached
with solid stainless steel pins that are
splintered on one end. Always push
the pins out with the splintered end
first. In the housing the splintered side
can be recognized from the slightly
larger diameter guiding at the hole.
The disassembly and assembly of the
arm strap requires a special tool. We
recommend arm strap changes be done
by an authorized SCUBAPRO dealer.
Содержание M2
Страница 1: ... M2 User Manual ...
