11
English
M2 USER MANUAL
3.1.4
Setting 24h or AM/PM mode
(“MODE”)
By pressing the SEL button the 24h or 12h
setting on the top row starts blinking. You
may change the setting by pressing the +/
UP or -/DOWN buttons. By pressing the
SEL button the mode will be confirmed.
3.1.5
Set dual time mode (“UTC 2”)
Dual time uses the same “base time” as the
main clock. Therefore, adjusting the time as
described in section ‘
Setting the time
’ will
also influence the dual time. The dual time
zone selection will define the difference to the
main clock time. When the time zone selection
is OFF, then the dual time is disabled.
When pressing the SEL button the UTC2
time hours start blinking. You may change
the setting by pressing the +/UP or -/
DOWN buttons in a range of +14h..-13h
or by selecting ‘off.’ By pressing the SEL
button, the minutes will start blinking and
you may edit them using the +/UP or -/
DOWN buttons in 15-minute intervals. The
UTC2 setting will be confirmed by pressing
the SEL button.
3.1.6
Setting the date (“DATE”)
By pressing the SEL button the first two
date digits start blinking. In 24h mode the
first digits represent days, in 12h mode they
represent the month. You may change them
by pressing the +/UP or -/DOWN buttons.
By pressing the SEL button the next two
digits start blinking and you may change
them by pressing the +/UP or -/DOWN
buttons. By pressing the SEL buttons again,
the year starts blinking. By pressing the SEL
button the date will be confirmed.
3.1.7
Setting the sound off
(silent mode) (“SOUND”)
ON/ATT/ALR/OFF
By pressing the SEL button the current
setting will start blinking on top of the display.
By pressing the +/UP or -/DOWN buttons
you may select between the normal mode
(ON), where alarm and button tones are on,
or the silent mode (OFF), where all tones are
off, or alarm mode (ALR) where only alarm
tones are on, or attention mode (ATT), where
alarm and attention tones are on. The sound
off selection is protected with a code.
Содержание M2
Страница 1: ... M2 User Manual ...
