Uwatec M2, Руководство пользователя

Страница: 16 / 64

16 M2 USER MANUAL
1. Repetitions (initial value), see the note
below.
2. Heart rate.
3. Temperature.
4. Current time.
Pressing the SEL button will activate the
compass and the 12 o’clock direction is
shown in degrees on the top row with an
arrow indicating towards north on the dial ring.
A press-and-hold of the +/UP button will
change the bottom row information in the
following order:
1. Repetitions per minute.
2. Minutes per 1000 repetitions.
3. Current altitude.
4. Altitude difference during the exercise
(elevation).
5. Total ascent during the exercise.
6. Barometer.
F
NOTE: Since the M2 is worn on the wrist,
it is counting repetitive movements from
its internal sensors in Sport mode. The
M2 is not a pure step counter since arm
movements may count as repetitions as
well. The M2 is also not an activity band
since only same-direction movements
are counted.
3.2.3 Reading the altitude, barometer
and temperature values (“ALTI”)
In the altitude menu the current altitude is
calculated from the barometric pressure
and is shown on the middle row. The
current temperature is shown on the top
row. The current altitude class is shown on
the bottom row.
F
NOTE: Barometric pressure is a variable,
changing with weather and atmospheric
pressure at that particular elevation. The
Dive algorithm uses Altitude Classes
which are directly derived from the
barometric pressure. Altitude is counted
from the current barometric pressure and
is therefore a relative value.
With a press-and-hold of the -/DOWN
button the display changes, now showing
barometric pressure at sea level on the top
row. Or, with a press-and-hold of the +/
UP button you get the barometric pressure
at current altitude in mbar. This barometer
feature allows you to foresee approaching
weather in the upcoming hours if your
altitude remains the same.
When current elevation is known, the
altitude can be adjusted by pressing the SEL
button. The altitude value will start blinking.
By pressing the +/UP or -/DOWN buttons
the value can be adjusted in 10m/50ft
increments. Adjusting the altitude elevation
has no effect on the Altitude Class.
F
NOTE: Different combinations m&˚C,
Ft&˚C, m&˚F or Ft&˚F can be selected
from the Dive mode menu: Units.
3.2.4 Using, calibrating and setting
the compass (“COMP - USE
COMPASS”)