38
M2 USER MANUAL
or -/DOWN buttons desaturation can be
deactivated and the state is indicated with the
selection ‘off’. When the off state is confirmed
by pressing the SEL button, the code page
appears. The first digit starts blinking and
by pr/UP or -/DOWN scrolling can
commence. By pressing the SEL button the
number is confirmed and the next number
starts blinking. When the code is input
correctly and is confirmed by pressing the SEL
button, the desaturation reset is complete.
4.6 SWIM mode settings
(“SWIM”)
For the Surface Exercise you must set
the cycle threshold (how much depth
difference is counted as a stroke cycle)
and the distance per cycle for the proper
result. The following illustration shows the
parameters.
By pressing SEL on the SWIM menu, you
reach the SWIM mode settings. By pressing
SEL again the SWIM mode activation starts
blinking and you may scroll between off/on/
pulse (with pulse the mode is enabled with
heart rate) by pressing the +/UP or -/DOWN
buttons. By pressing SEL the selection is
confirmed and the count stroke threshold
starts blinking. A big threshold setting will
detect only large movement as a stroke,
while too small a setting may detect too
many strokes, so you must test and adjust
according to your personal style. By pressing
the +/UP or -/DOWN buttons the value can
be selected from 2cm/1in to 40cm/16in. By
pressing SEL the distance per stroke starts
blinking. You may select the value from
0.5m/2ft to 5.0m/16ft by pressing the +/UP
or -/DOWN buttons. By pressing the SEL
button the values are confirmed.
depth threshold
stroke length
Apnea, scuba, gauge
Содержание M2
Страница 1: ... M2 User Manual ...
