BioDoc-It
2
Imaging System
19
81-0358-01 Rev E
Connecting to a Network
BioDoc-It
2
Imaging Systems have built-in wireless networking capability. While it is fairly simple to connect
the system to a network, it is highly recommend to obtain assistance from a network administrator to ensure
that the process is completed properly.
There is also the option for connecting through wired USB-to-Ethernet.
Follow Microsoft or local standard network protocols for network configuration. To minimize the VisionWorks
touch
interface and access Microsoft Windows for network configuration, press the
Minimize
(“_”) button in
the upper-right corner of the software.
Installing Drivers or Additional Software
In the event that additional drivers or software must be installed on the system, exit the VisionWorks
touch
interface and access Microsoft Windows by pressing the
Close
(“
X
”) button located in the upper-right corner
of the main TS screen.
To install drivers or additional software, copy the software to an external storage device, open Windows
Explorer, navigate to the appropriate folder and run the desired program.
