UV Pure Technologies UPSTREAM Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

UV Pure Technologies UPSTREAM Скачать руководство пользователя страница 7

Upstream Instruction Manual

Released on 5/1/10 – R800001L

Page 7

UV Pure Technologies Inc. © 2010

WARNING: Ultraviolet Light Hazard

The lamps in the unit emit ultraviolet (UV) light that can cause
permanent damage to the skin & eyes.

Never look at the lamp when

it is operating.

Do not plug the unit in unless it is properly secured to

a wall (see Installation Instructions) and the front panel and ballast
enclosure door are secure.  Do not open the front panel or perform any
service unless the unit has been unplugged.  Never look into the unit or
place any exposed skin into the illuminated areas when it is operating.
Do not operate a unit that has been damaged or missing any
components or safety devices.

Note that service to the unit does not require the removal of the side
aluminum panels or aluminum endplates and they must remain
assembled. The Upstream unit is not intended for use by young
children or infirm persons without supervision.  Young children should
be supervised to ensure that they do not play with the Upstream unit.

Parts Included



Upstream UV system complete with integral wall brackets (1)



Instruction manual (1)



Product & warranty registration card (1)



Power cord (1) (located within packaging)



Stainless flexible hoses (2) per system (hoses located within
packaging)



Ultraviolet lamps (2) – installed within the unit



External dry contact for remote monitoring or optional autodialer.



20’ of Flexible hose for connection of purge valve to drain



Transient Voltage Surge Suppressor (TVSS)/Surge Protective Device
(SPD) for North American markets (120Vac systems)



Optional - Pre-treatment sediment and or carbon filter to remove water

particles, odor or trace chemicals for improved taste.

- Automatic shutoff solenoid valve (included in bundled systems).
- Remote Wireless Monitor with 9V battery (1) (in bundled systems
only).

UV

UV

UV

«
...
5
6
7
8
9
...
»

Содержание UPSTREAM

















































Отзывы:

Нет отзывов