UV Pure Technologies UPSTREAM Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 48

UV Pure Technologies UPSTREAM Скачать руководство пользователя страница 11

Upstream Instruction Manual

Released on 5/1/10 – R800001L

Page 11

UV Pure Technologies Inc. © 2010

water supply for a number of hours. If disinfection is necessary, all pipes must be
treated and flushed. Once the unit is plugged in, the new UV lamps may take
from a few moments to several hours to reach full power. Having a Lamp Alarm
is normal with a new system (or with newly installed lamps) until the lamps have
reached full power.

Summary of Installation:

Unpack and install Upstream on wall
Install top & bottom hose to unit and to plumbing
Install optional Shutoff solenoid valve
Install optional bypass & drain plumbing
Install purge valve discharge line to a suitable drain line
Connect system power cord to supplied Transient Voltage Surge Suppressor
Connect Transient Voltage Surge Suppressor to grounded power outlet

Assembling the Unit

Step 1:

Unpack the unit, being careful to remove all packaging material. Inspect

the unit for damage particularly the quartz sleeve – See Figure 4A for
disassembly.

Ensure back reflector is completely down

– sometimes

movement in shipping cause the back reflector to slide up. Push down on it until
it rests on the bottom plate of the unit. Check & tighten the fasteners securing the
top and bottom stainless manifolds - see Figure 4B.

Step 2:

The Upstream has four keyhole slots for convenient mounting – all four

should be used.

The unit should be secured vertically to a solid wall large

enough to cover the complete backside of the unit – See Figure 1E. Do not

install the unit horizontally. Remove the top and bottom covers of the unit to
make the mounting holes accessible.

Step 3:

Connect the Stainless flexible hoses to both the top and bottom of the

Upstream. Make sure that the sealing washer is inside the hose end before
making the connection. Tighten securely. Wrap the top hose with pipe insulation.
(Not provided)

Connecting the Pipes

We recommend that a qualified plumber or certified technician perform the water
connections for your Upstream.

Water must flow into the inlet at the bottom of

the unit. The outlet is located at the top of the unit.

Install the optional shutoff

valve before the unit.

Step 1:

Shut off the water supply.

Caution:

Always turn off the water supply

before modifying or disconnecting any piping. Always open a faucet after shutting
off the water supply to relieve water pressure and ensure that the water has been
completely shut off.

Step 2:

If you have decided to install an optional bypass line and drain, you may

begin to install these fittings at this point. See Figure 1B or 1C for more
information on how to connect optional bypass piping and drain.

«
...
9
10
11
12
13
...
»

Содержание UPSTREAM

















































Отзывы:

Нет отзывов