5
Concord
an accidental alarm.
❑
To stop sirens and cancel an alarm. When an alarm
condition occurs disarming the system turns off any
sirens.
To disarm to Level 1—OFF using a touchpad:
1.
Press
1
. Touchpads display “ENTER CODE.”
2.
Enter your access
CODE
. Touchpads display date
and time or programmed text and the system sounds
one long beep.
To disarm to Level 1—OFF using a keychain touchpad:
1.
Press the
Unlock button.
Arming Level 2—STAY
There are times when you want intrusion protection, but
still want the freedom to move around within your house
without setting off an alarm. For example, in the evening
when your family is inside for the night. In this and simi-
lar situations, set your system to 2—STAY.
To arm to Level 2—STAY using a touchpad:
1.
Close all protected perimeter doors and windows.
2.
Press
2
at any touchpad. Touchpads display,
“ENTER CODE.”
3.
Enter your access
CODE
. Touchpads display,
“Armed to STAY” and the system sounds two short
beeps.
4.
If leaving the premises, exit through a designated
delay door immediately.
Note
If Quick Arm feature is on, an access code is not
required to arm the system to Level 2— STAY.
To arm to Level 2—STAY using a keychain touchpad:
1.
Press the
Lock button.
Arming Level 3—AWAY
At other times, you want every sensor to be alert: when
the family goes on vacation, or at closing time.
In this and similar situations, set your system to
3—AWAY for maximum protection. All sensors are
active—perimeter door and window sensors, and interior
motion detectors.
To arm to Level 3—AWAY using a touchpad:
1.
Close all perimeter doors and windows.
2.
Press
3
at any touchpad. Touchpads display,
“ENTER CODE.”
3.
Enter your access
CODE
. Touchpads display,
“ARMED TO AWAY” and the system sounds three
short beeps.
4.
Exit through a designated delay door immediately.
Note
If Quick Arm feature is on, an access code is not
required to arm the system to Level 3— AWAY.
To arm to Level 3—AWAY using a keychain touchpad:
1.
Press the
Lock button twice to go from Level 1 to
Level 3, or once to go from Level 2 to Level 3.
Keychain Touchpad Arming
To disarm your system with a keychain
touchpad, press the unlock button.
Your installer can set up your keychain touchpad
to arm the system in one of two ways:
1.
Press the Lock button to arm the system
directly to Level 3—AWAY with no Exit
Delay. Using this method, you would not be
able to arm to Level 2—STAY.
2.
Press the Lock button to increase the arming
level each time it is pressed (Level 1 to Level
2, or Level 2 to Level 3). The Exit Delay
time would be applied.
Press the Lock button after arming to AWAY
(Level 3) to activate the Latchkey feature (must
be set up by installer). For more information, see
“Latchkey Paging” on page 19.
Q u i c k A r m
T h e Q u i c k A r m f e a t u r e l e t s y o u a r m
y o u r s y s t e m w i t h o u t u s i n g a n a c c e s s c o d e .
Y o u w i l l s t i l l n e e d t o e n t e r a n a c c e s s c o d e
t o d i s a r m t h e s y s t e m .
F r o m L e v e l 1 o r 2 ,
p r e s s 3 f o r
L e v e l 3 A W A Y .
F r o m L e v e l 1 O F F ,
s i m p l y p r e s s 2 f o r
L e v e l 2 S T A Y .
Stay
2
Away
3
C o n t a c t y o u r
i n s t a l l e r i f y o u ' d
l i k e t o u s e
t h i s f e a t u r e .
