Utax CLP 3721 Скачать руководство пользователя страница 10

Страница: 10 / 197

vii

Legal and Safety Information

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE

PRINTER'S EMULATION MODE. The printer is factory-set to emulate the

PCL.

Notice

The information in this guide is subject to change without notification.

Additional pages may be inserted in future editions. The user is asked to

excuse any technical inaccuracies or typographical errors in the present

edition.
No responsibility is assumed if accidents occur while the user is following

the instructions in this guide. No responsibility is assumed for defects in

the printer's firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in

connection with the sale of the page printer, are protected by copyright.

All rights are reserved. Copying or other reproduction of all or part of this

guide, any copyrightable subject matter without the prior written consent

notice as the material from which the copying is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is

trademark of Kyocera Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-

Packard Company. Centronics is a trade name of Centronics Data

Computer Inc. PostScript is a registered trademark of Adobe Systems

Incorporated. Macintosh is a registered trademark of Apple Computer,

Inc. Microsoft and Windows are registered trademarks of Microsoft

Corporation. PowerPC is a trademark of International Business Machines

Corporation. ENERGY STAR is a U.S. registered mark. ThinPrint is a

trademark or registered trademark of ThinPrint GmbH in Germany and

other countries. All other brand and product names are registered

trademarks or trademarks of their respective companies.

This product contains UFST™ and MicroType

from Monotype Imaging

Inc.

CAUTION

NO LIABILITY IS ASSUMED FOR ANY

DAMAGE CAUSED BY IMPROPER INSTALLATION.

the Copyright owner

is prohibited. Any copies made of all or part

this guide, any copyrightable subject must contain the same copyright

Содержание CLP 3721






































































































































































































Результаты поиска

Содержание CLP 3721

Отзывы:

Похожие инструкции для CLP 3721

Бренды по названию

Популярные бренды

Utax CLP 3721, Инструкция по эксплуатации

Результаты поиска

Содержание CLP 3721

Отзывы:

Похожие инструкции для CLP 3721

Бренды по названию

Популярные бренды