T
ROUBLESHOOTING AND
H
ELP
R
ESOURCES
6-30
Windows NT
Turn off your computer and remove your modem. Restart and click Windows Start, Settings, and then Control Panel. Double-
click the Ports icon. Your modem must be jumpered to a COM port setting that does not appear in this list.
PROBLEM: My software isn’t recognizing my modem.
Possible solution:
Your communications software may not function properly if you have more than one version of the software installed, you are using an
older version, or you have more than one communications software installed on your system. We highly recommend using the
communications software provided with your modem on the Connections CD-ROM.
Possible solution:
Your software’s port settings may be incorrect. There should be a place in the Setup section of your software that addresses port
settings. Make sure the software’s port settings match those for your modem. See the Installation Guide that came with your modem
for an explanation about how to determine your modem’s port settings. Check your communication software’s documentation for
instructions on adjusting the port settings in your software.
Possible solution:
You may not have the correct modem type selected in your software or in Windows. Click on Windows Start, Settings, and Control
Panel. When Control Panel opens, click Modems. Here you will see a list of installed modems. You can also add, remove, or view
the properties of modems from this window. The 3Com U.S. Robotics modem you have installed should be present in the list of
installed modems. If none of the modem descriptions in the list match your 3Com U.S. Robotics modem or no modems are listed, your
modem is not properly installed. Try reinstalling your modem.
Содержание 3CP5613
Страница 2: ......