urmet domus Miwi 1032/9, Руководство пользователя

Страница: 59 / 98

BRACKET CONFIGURATION
http://www.miwiurmet.com.pl e-mail:miwi@miwiurmet.com.pl 59
WINFLAT BRACKET REF. 1202/952
BASIC FEATURES
The bracket ref. 1202/952 is dedicated for Matibus SE system.
Main purpose of the bracket is setting the address, and turn on
video door phone when it is calling.
DESCRIPTION OF THE TERMINALS BOARD
A video signal channel A,
B video signal channel B,
V3 video signal (core of coax),
V5 video signal (shield of coax),
R1 video power negative,
R2 video power positive,
RD video power positive (external triggered),
0L GND line,
+L data Line,
R3 silent video on,
X1, X2 service button terminals ( ),
Y1, Y2 service button terminals ( ).
BRACKET CONFIGURATION
O N
1 2 3 4 5 6 7 8
Switch Description Settings Function
S1
Address
settings
ON
1 2 3 4 5 6 7 8
Physical address
settings
Termination ON
S2
Video line
(UTP)
termination
Termination OFF
button
implement video
auto on function
S3
button
configuration
Service button
active
Floor call
terminals Y1 Y2
active
S4
button
configuration
Service button
active
UTP
S5
Kind of
video line
COAX
P1
Speaker
volume
Speaker volume
adjustment
Video detection
OFF
Zworka Z
Detection of
video signal
Video Detection
ON
Before launching system remember about settings physical address
of the video door phone. Physical address is setting by dip-switches
located on the bracket. Physical address in video version is in range
1-127.
Physical address is represented in binary form (position ON means
binary 1, position OFF means binary 0)
The Last dip-switch has to be set to 0.
Dipswitch settings Physical Address
1
13
25
127
VIDEO LINE (UTP) TERMINATION
Switch S2 should be set to TER position in case:
- Using UTP video line (A B terminals) and video distributors ref.
1752/54. Termination set to TER in all brackets.
- Using UTP video line (A B terminals) , in/out connection (without
distributors 1752/54). Termination set to TER only in the last
bracket.