urmet domus Miwi 1032/9, Руководство пользователя

Страница: 26 / 98

MOUNTING PANELS 1052/10 AND 1052/15
http://www.miwiurmet.com.pl e-mail:miwi@miwiurmet.com.pl 26
MOUNTING PANELS 1052/10..10D AND
1052/15..15D
Important: The module should not be illuminated from behind to
make the calling module display easier to read. Never direct the
module towards strong sources of light.
WALL-MOUNTED VERSION
1. Take out the front panel.
2. Disconnect terminal X2 (speaker) and X10 (Dallas key reader).
Fig. 2.
3. Take out the PCB assembly kit (move up bottom part and slide
out).
4. Fit the cable through the hole B. Fig. 3.
5. Fasten the case to the wall using 4 holes A. Fig. 3.
6. Fit the cable through the hole in PCB assembly kit.
7. Slip the PCB assembly kit into latches located in the top part of
the case.
8. Press down part of the PCB assembly kit.
9. Connect the wires.
10. Connect terminal X2 (speaker) and X10 (Dallas key reader).
Fig. 2.
11. Close and fasten the front panel.
Fig. 2 (PCB assembly kit).
FLUSH-MOUNTED VERSION
For flush-mounted version is recommend using the frame Ref.
525/RP2.
1.
Take out the front panel.
2. Disconnect terminal X2 (speaker) and X10 (Dallas key reader).
Fig. 2.
3. Take out PCB assembly kit (move up bottom part and slide
out).
4. Fit the frame 525/RP2 in the wall.
5. Fit the cable through the hole B. Fig. 3.
6. Fit the case in the frame, fasten the case to the wall using 4
holes A. Fig. 3.
7. Fit the cable through the hole in PCB assembly kit.
8. Slip the PCB assembly kit into latches located in the top part of
the case.
9. Press down part of the PCB assembly kit.
10. Connect the wires.
11. Connect terminal X2 (speaker) and X10 (Dallas key reader).
Fig. 2.
12. Close and fasten the front panel.
Fig. 3.