8
DS1072-028
9
DS1072-028
ENGLISH
Dip switch position
Main station number
Not
defined
(for programming with
external
keypad)
Station
1
Station
2
Station
3
The LED will light up and
a confirmation tone
will be heard
Set the main station number (1, 2 or 3)
by means of the dip switches (
*
)
on all door units
Hold the “Hall” button pressed
(PA; GND terminals) for the time
to be programmed
Press the programming button
on the door unit
Press the programming button
SIMPLIFIED PROGRAMMING
PROCEDURE
with dip-switch and led
Program door lock
activation time
(to be repeated
for all door units)
Assign station
number
The door unit will acquire
the time and will
beep when the button
is released
The LED will go out
and a confirmation
tone will be heard
1 2
1 2
1 2
1 2
This guide provides additional help for programming 2
nd
edition Bibus digitiser door units.
The following programming methods are recommended according to the complexity of the system and the
required functions:
A. Systems
with
up to 3 main calling stations
(without secondary systems):
1. Without staircase light function on button P1 (see diagram A1 page 8).
2. With staircase light function on button P1 (see diagram A2 page 10).
B. Systems with
more than 3 main calling stations
or
main and secondary calling stations
(see
diagram B page 12).
Diagram A1
Programming procedure for systems with
up to 3 main calling stations
(no secondary stations) without stair
lights function on button P1.
Go to the apartments in the booking
sequence, hold the door opener button
pressed and pick up the door
phone handset.
Press calling buttons of the door
phones to be programmed
and note the sequence down
Wait for 30 seconds
Press the programming button
The LED will go out
and a confirmation tone
will be heard.
The LED will light up
and a confirmation
tone will be heard
The LED will start blinking
and a confirmation
tone will be heard
The LED will light up
and a confirmation tone
will be heard
The door unit will beep
A confirmation beep
will be heard each
time the button is pressed
Program apartment
stations
(to be repeated
on any door unit
and all apartment
stations)
Press the programming button
on the door unit
Press the programming button
Assign calling code
to button P1
(to be repeated
for all door units).
Press button P1
The apartment station
will beep twice and the LED
will blink to confirm
programming.
The door unit LED
will go out
after programming
(*)
All data will be lost if the dip switches are moved also after ending the programming procedure.
